Buying a Trailer Hub Cap
A trailer hub cap is a good way to keep dust and debris from falling into your wheel nuts. The wheel hub is a donut shaped piece of metal that sits on the axle of your trailer. It contains the bearings that help to reduce friction when your tires spin. If you do not take care of the hub, it may eventually come loose or crack. This could cause thread damage to the axle. Also, you might find that the cotter pin in the bearing is misaligned.
These caps can be purchased at a range of prices. Stemco hub caps are a common choice, and they are a great way to protect your bearings from harsh road conditions. They are also reasonably priced, and are made of tough materials. While some manufacturers use threaded, reusable dust caps, others use rubber caps that tend to crack over time.
If you want to save money, you can buy a preassembled hub kit, which includes everything you need to install the hub. Many kits include a cotter key, grease seal, and bearings. In addition, some kits even come with tires. To get more enlightned about this article, Click here for more info on trailer hubcaps.
Some towing experts recommend checking your wheel hubs at least once a year. Others recommend more frequent checkups. However, it is not necessary to have a mechanic inspect your hubs. You can do it yourself, and it shouldn't take too much effort. There are three main parts that you will need to know: the cotter pin, the bearing, and the castle nut. Each has a reference number that indicates its diameter. With a quick look at your hub, you should be able to determine the size of your bearings.
To remove the dust cap, you need to tap it from the top of the wheel. If you don't want to jack up the trailer, you can use a flat-edge screwdriver to do the job. Be careful not to break the dust cap as you remove it. When you put it back on, make sure that the cotter pin on the bearing is not touching the inside of the dust cap. Otherwise, you may end up losing your bearing and protecting your oil.
Another way to keep your bearings safe is to replace the dust cap. It is not uncommon for dust to get into your wheels and bearings over time. Dust caps are relatively inexpensive and easy to install. Plus, they are a simple way to protect your trailer from dust.
Another way to maintain your hubcaps for trailers is to change the grease in your hubs. Oil-bath hubs are the standard equipment in many trailers. Not all manufacturers use oil-filled hubs, however, and it is not recommended that you use an oil-filled hub if you have solid rotor disc brakes. An oil-filled hub is a bad idea if your trailer is parked for long periods of time.
One of the most important things to keep in mind when buying a hub is the type of oil you need to use. Oil-filled hubs do not have to contain two-cycle oil, and you can use an oil that is 70-90 weight. If you want to know more about this topic, then click here: https://en.wikipedia.org/wiki/Hubcap.